Epofloor T EPOXY FLOOR COATING TRANSPARENT 2K

KEY PROPERTIES:

  • High mechanical strength at room temperature
  • Tack-free at room temperature
  • Highly compatible with glass fabrics and fillers
  • Tack-free with choice of pot life and curing rate according to hardener
  • Can be filled with mineral or metal materials
  • Transparent epoxy for primer and topcoat
Category

APPLICATIONS

  • Construction of jigs, foundry patterns and tooling aids
  • General tool building
  • Wet lay-up tools using glass ply
  • Backing structures
  • Adhesive

PRODUCT DATA

Property Unit Epofloor T (A) Epofloor T (B)
Appearance Visual Clear liquid amber Clear liquid pale yellow
Viscosity at 25°C mPas 1000-5000 200-700
Density g/cm³ 1.1 1.0

PROCESSING

Mix ratio Parts by weight
A 100
B 50

Mix the two components thoroughly in the ratio indicated.

Apply in thin layers with a brush or spatula, wait until gel coat has gelled, but ensure that it is still slightly tacky before proceeding.

Post-curing will improve final properties.

PROPERTIES AFTER MIXING RESIN AND HARDENER

Resin/ Hardener mix Volume Unit Epofloor T (A)

Epofloor T (B)

Appearance     Yellowish
Viscosity at 25°C   mPas 900-1.000
Pot life at 25°C 250 ml Min 50-70
Demolding time   h 24

PROPERTIES AFTER CURING TIME: FOR COMPOSITE APPLICATION AND TOOLING

 

After cure: 7 days at RT or 14 hours at 40°C

Density ISO 1183 g/cm³ 1.1 1.1 1.1
Deflection temperature ISO 75 °C 45-50 50-55 55-60

 

STORAGE

The resin and hardeners described in this instruction sheet have the shelf life shown provided they are stored at 6-28°C in a dry place and sealed containers, preferably those in which they are supplied.

WORKING CONDITIONS

The products should be used when in the temperature range 18-25°C

PACKAGING

System A B
Quantity and weight 1 × 25 kg 1 × 12.5 kg
Quantity and weight 6 × 300 gr 6 × 150 gr
Quantity and weight 1 × 1000 gr 1 × 500 gr
Quantity and 1 × 5 kg 1 × 2.5 kg

CAUTION AND SAFETY

RBBCO. Products are manufactured to meet the highest safety standards and as a result are harmless to handle provided basic chemical handling precautions are observed. Measures should be taken to prevent such material from coming in to contact with skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water. The use of solvents is to be avoided.

Disposable paper – not cloth towels – should be used to dry the skin. Adequate ventilation of the working area is recommended.

Reviews

There are no reviews yet.

Be the first to review “Epofloor T EPOXY FLOOR COATING TRANSPARENT 2K”

Your email address will not be published.