200 -300 g/m² Depending on the porosity of the surface.
DIRECTION FOR USE
The surface must be free of oil, grease, moisture, dust, loose particles and rust. Scratch all surfaces with a sandblast or special tool. Clean all oil and grease remaining on the surface with vapor pressure and suitable cleaner.
First shake each component and then add B component to A component. Continue mixing for 3 minutes in suitable revolution (400 rev/min) using stirrer (until a homogeneous mixture is obtained. for smaller amounts, mix cone cup of B with 3 cup of A. Apply the homogeneous mixture with a brush or spray on the surface.
Product must be stored in original containers and protect from sunlight and rain.
This product may damage the skin. Use safety equipment such as gloves and glasses. in case of contact with skin and eye, wash with plenty of water.