RB-CAL 500 LIQUID CONCRETE ADHESIVE

DESCRIPTION

Solvent-free, transparent emulsion for water-repellent impregnation of joints and grouts of balconies terraces and concrete adhesive for old cement surface to new concrete surface

APPLICATION FIELDS

It is ideal for waterproofing of terraces and balconies. It is used for tiles, concrete, screed and natural stone impregnation. It produces water-repellent surfaces on porous tiles, joints and cracks up to 0.2 mm. It ensures waterproofing of later sealant for tile joints in bathrooms and showers as a transparent. It is also suitable for surfaces that require temporary protection, such as cracked glazes. It can be used for both absorbent and non-absorbent surfaces.

FEATURES

  • Waterproofs joints
  • Protects against froze
  • Dries rapidly (2-6 hours)
  • Permits water vapor diffusion
  • Protects porous surfaces
  • Prevents mould and moss formation, dirt resisting
  • Suitable for indoors and outdoors
  • Forms neither gloss nor paling

TECHNICAL SPECIFICATIONS

  • Chemical base: Silicone emulsion
  • Density: Approximately 1.0 g/cm³
  • Application temperature: 5°C to 25°C
  • Rainproof: After 2-6 hours
  • Final impregnation: After 14 days (1 or 2 year
  • Impregnate)
  • Water impermeability: < 0.5 kg/m²
  • Water vapor resistance: 0, not applicable
  • Color: Milky white, becomes transparent after drying
  • Shelf life: 1 year in conditions protected against freezing

CONSUMPTION

200 g/m²

DIRECTION FOR USE

RB-CAL 500 can be used on all hard, clean, dry or slightly wet surfaces. Surfaces with insufficient strength and defected areas must be repaired and cleaned before application. Heaved areas must be cleaned with mechanical measures. The regions, on which no APPLICATION will be carried out, should be protected. The subfloor must be protected against negative side humidity. Due to its gloss, it should not be used on facades (wall) impregnation.

Shake the material well before use. Apply it homogeneously on the surface with a plastic (rubber) brush or roller. For indoor joints use a brush. After a maturing time of 5 minutes, remove the excess material. One application is sufficient.

SAFETY

Do not use under sunlight and on warm surfaces due to sunlight.

 

Reviews

There are no reviews yet.

Be the first to review “RB-CAL 500 LIQUID CONCRETE ADHESIVE”

Your email address will not be published. Required fields are marked *