SURFACE PREPARATION
Prepare concrete or rock in “V” shape around leak. Remove loose material, clean cavity completely. Lightly dampen the substrate just prior to application if necessary.
MIXING
Mixing should only be done by hand. Mix with clean water to obtain desired consistency. Do not over-mix. Do not over-wet. Do not retemper. Mix ratio water: powder is 1:4.
DIRECTION FOR USE
Force sealspeed 100 into the crack or hole by hand or with a trowel. Rapidly fill to the full depth of the opening. Start filling from outside work toward center of the leak. The material should be held in place & leveled off. For heavy water infiltration through crack, Insert a tube and seal in position with sealspeed 100 firstly. Then remove or cut the tube and seal with sealspeed 100.
5.26 liter mortar is achieved by mixing 8 kg powder with 2 liter water.
Keep the product in shadow at temperatures above 35 °C and use cool water to make mortar.
In order to achieve early initial resistance, Use warm water to make mortar at temperatures below 5 °C.
TECHNICAL PROPERTIES
Appearance: Grey powder
Specific Gravity of Paste: 1.9 gr/cm3
PH Value (10% Conc.): 13.5
Setting time: 15-20 seconds
Consumption temperature: ≥10C
Storage temperature: 10-300C
STORAGE
The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.
SAFETY
sealspeed 100 is alkaline, use protective gloves. If gets into eyes clean out with water immediately, and contact a physician. Mix in small quantities.
Reviews
There are no reviews yet.